Ortofon 2M Black Verso
0% Financing Available ! $855
Ortofon 2M Black Verso Cartridge
The Ortofon 2M Black Cartridges are simply the best of everything, both in resolution and insight into each recording.
Product Description
Price: $855.00
0% Financing Available !
Ortofon 2M Black Verso Cartridge
The 2M Black Verso model is an alternative product for bottom mount tonearms.
To find the recommended Ortofon replacement cartridge for your turmtable/tonearm please check out Replacement Cartridges selector »
How to replace M2,0 mm screws on 2M Black Verso
1. Remove the stylus with the stylus protection guard from the cartridge body to avoid any damage to the diamond.
2. Using Torx 8 key, unscrew the black screw from the Verso top plate.
3. Remove the top plate from the cartridge body by pulling the screws off.
4. Remove the two countersunk screws from the top plate.
5. Insert the two M2,0 mm screws in the top plate.
6. Mount the top plate on the cartridge body. Hold the top plate with screw-threads hanging down and turn the cartridge body 180 degrees. Mount from above.
7. Mount the black screw in the top plate and tighten with appropriate force.
8. Mount the cartridge on the tonearm using the enclosed tool.
9. Mount the stylus with the stylus protection guard on the cartridge body.
2M Black Verso accessories included:
- 1 x Stylus brush, carbon fibre
- 1 x Allen key Torx 6
- 1 x Allen key Torx 8
- 2 x Screw M2,0 x 6
- 1 x Stylus pressure gauge
- 1 x Socket spanner
When it comes to any Vinyl, any Phono purchase, Turntables, Cartridges, Phono Stages, Phono Cables, even if you consider yourself an expert, call our Phono Department FIRST to avoid the many pitfalls that can turn into a very unsatisfactory experience. Talk to our experts, who have been there and done that. We are here to help!
The 2M Black Series is the MM flagship from Ortofon
Affordable excellence!
Manufactured from the Lexan DMX piano black, that protects against resonances. Shibata diamond stylus. Highly polished profile. Wide contact area on the groove walls of the record. Detailed, smooth, very three dimensional. Split pole pins with a silver plated copper wire.
Precise and accurate performance, an excellent value as well.
If Vinyl is as important to you as it is to us, call our phono experts to see if this cartridge is a good fit for your turntable.
2M Black Specifications
Output voltage at 1000 Hz, 5cm/sec. – 5 mV
Channel balance at 1 kHz – 1 dB
Channel separation at 1 kHz – 26 dB
Channel separation at 15 kHz – 15 dB
Frequency range at – 3dB – 20-31.000 Hz
Frequency response – 20-20.000 + 2 / – 0 dB
Tracking ability at 315Hz at recommended tracking force – 80 µm
Compliance, dynamic, lateral – 22 µm/mN
Stylus type – Nude Shibata
Stylus tip radius – r/R 6/50 µm
Tracking force range – 1,4-1,7g (14-17 mN)
Tracking force, recommended – 1,5 g (15 mN)
Tracking angle – 20°
Internal impedance, DC resistance – 1,2 kOhm
Internal inductance – 630 mH
Recommended load resistance – 47 kOhm
Recommended load capacitance – 150-300 pF
Cartridge colour, body/stylus – Black/Black
Cartridge weight – 7,2 g
2M PnP MkII cartridge with integrated headshell weight – 20 g
2M PnP MkII cartridge with integrated headshell length – 52 mm
Replacement stylus unit – 2M Black (interchangeable with 2M Bronze
You must be logged in to post a review.
Reviews
There are no reviews yet.