STORE HOURS - 8AM to 8PM 7 DAYS
1-800-676-1085 - Sales Ext #2

JBL Synthesis SAM2LF

$1,500.00

0% Financing Available!!

JBL Synthesis SAM2LF Woofer Module

Dual 8″ (200 mm) Low-frequency Woofer Module

The SAM2LF low-frequency woofer module represents the synthesis of everything that JBL® has learned about the emotional power of audio and video in 60 years of preeminence in the field.

JBL Synthesis

Product Description

0% Financing Available!!

JBL Synthesis SAM2LF Woofer Module

Dual 8″ (200mm) Low-frequency Woofer Module

The SAM2LF low-frequency woofer module represents the synthesis of everything that JBL® has learned about the emotional power of audio and video in 60 years of preeminence in the field. It sets new benchmarks in the use of high technology and provides you with the experience of being in some of the world’s greatest movie houses and concert halls, right at home!

Main Features:

ACCURATE MID-BASS DRIVERS: The 8″ (200mm) mid-bass drivers incorporate many of JBL’s patented technologies – such as Symmetrical Field Geometry™ (SFG), Symmetrical Inductance Modulation (SIM) and Vented Gap Cooling™ (VGC) – as well as unique cone and dome materials, to provide tight, smooth midrange sound without harshness, stridency or listener fatigue.

DEEP-ANODIZED CONE AND DOME MATERIAL: The special deep-anodized aluminum cone and dome material, together with the motor features, helps to reduce midband distortions to very low levels (approximately 50dB to 60dB below the fundamental signal driven at 100dB output).

Other Features:

SAM1 and SAM2LF must be combined together and either SDEC-4500 (for bi-amplified active crossover) or SAM12X (for passive 3-way crossover).

SAM12X is a passive crossover for SAM1HF/SAM2LF modules, supporting one SAM1HF and up to two SAM2LF modules. SAM12X is compatible with SDEC-3000.

Specifications:

Maximum Recommended Amplifier Power 300 Watts (RMS)
Impedance 6 Ohms
Sensitivity (2.83V @ 1m) 98dB HF; 92dB LF
Frequency Response 60Hz – 40kHz
Crossover Frequencies 890Hz, 9kHz
Ultrahigh-Frequency Driver 045Ti 1” (25MM) Pure titanium compression driver with aluminum edge-wound voice coil and 2” (51mm)
neodymium motor assembly, mounted in a SonoGlass® constant-directivity horn
High-Frequency Driver 435AL-1 3” (75mm) Aquaplas-treated aluminum-dome compression driver with aluminum edge wound voice
coil and neodymium motor assembly, mounted in a vertical SonoGlass® constant directivity horn
Low-Frequency Driver Dual 8” (200mm) deep-anodized-aluminum cone and dome material with dual inside neodymium magnets,
shielded motor structure and 2” (51mm) voice coils
Dimensions (H x W x D) SAM1HF: 17-1/4″ x 8″ x 11-1/2″ (438mm x 200mm x 292mm) Add 1-3/4″ (45mm) depth for mounting
SAM2LF: 20″ X 10″ x 10-3/4″ (508mm x 254mm x 273mm) Add 1-3/4″ (45mm) depth for mounting hardware
Weight SAM1HF: 25 lb (11kg)
SAM2LF: 29 lb (13kg)

Reviews

There are no reviews yet.

Be the first to review “JBL Synthesis SAM2LF”

JBL synthesis SAM2LF Woofer Module
Specifications:

Maximum Recommended Amplifier Power 300 Watts (RMS)
Impedance 6 Ohms
Sensitivity (2.83V @ 1m) 98dB HF; 92dB LF
Frequency Response 60Hz – 40kHz
Crossover Frequencies 890Hz, 9kHz
Ultrahigh-Frequency Driver 045Ti 1” (25MM) Pure titanium compression driver with aluminum edge-wound voice coil and 2” (51mm)
neodymium motor assembly, mounted in a SonoGlass® constant-directivity horn
High-Frequency Driver 435AL-1 3” (75mm) Aquaplas-treated aluminum-dome compression driver with aluminum edge wound voice
coil and neodymium motor assembly, mounted in a vertical SonoGlass® constant directivity horn
Low-Frequency Driver Dual 8” (200mm) deep-anodized-aluminum cone and dome material with dual inside neodymium magnets,
shielded motor structure and 2” (51mm) voice coils
Dimensions (H x W x D) SAM1HF: 17-1/4″ x 8″ x 11-1/2″ (438mm x 200mm x 292mm) Add 1-3/4″ (45mm) depth for mounting
SAM2LF: 20″ X 10″ x 10-3/4″ (508mm x 254mm x 273mm) Add 1-3/4″ (45mm) depth for mounting hardware
Weight SAM1HF: 25 lb (11kg)
SAM2LF: 29 lb (13kg)