Creek Audio Evolution 50P

$995.00

0% – 3 Year Financing Available!!

Creek Audio Evolution 50P Power Amplifier

The EVOLUTION 50P is the most sophisticated and reasonably priced Power Amplifier Creek has made. It provides stunning audio performance and is capable of out-performing other makes of Power Amplifiers costing many times the price.

Product Description

0% – 3 Year Financing Available!!

Creek Audio Evolution 50P Power Amplifier

The EVOLUTION 50P is the most sophisticated and reasonably priced Power Amplifier Creek has made. It provides stunning audio performance and is capable of out-performing other makes of Power Amplifiers costing many times the price.

Who needs a power amp?  Well, you do, if you use a digital or analogue pre-amplifier like the EVOLUTION 50CD or 100CD, with built-in volume control.  It is also possible you already own an integrated amplifier like the EVOLUTION 50A and wish to bi-amp your system to power difficult loudspeaker loads.

The new 55W (into 8 Ohms) power amplifier forms part of the new generation EVOLUTION 50 range of products. Housed in a slim case with engraved front panel and solid control knobs, it’s finished with either a black or silver brushed aluminium front panel.

The EVOLUTION 50P uses a massive 200 Watt toroidal mains transformer with separate windings for high and low current analogue and control circuitry. This solution produces a good power to weight ratio and low magnetic interference. Creek’s design policy of connecting several small low impedance capacitors in parallel creates an ultra-high specification capacitor to smooth the DC and helps to produce a very powerful and accurate sound from such a relatively small amplifier.

This power amplifier has a similar high-end, bi-polar transistor, class A/B power amplifier circuit, to the highly rated EVOLUTION 50A. It achieves very high open-loop gain and low distortion for a smooth and powerful sound. Featuring Sanken 15 Amp power transistors, with built-in thermal compensation for rapid bias tracking performance, the EVOLUTION 50P Power Amplifier circuit has very low output impedance and is also able to deliver high output current. This combination will provide exceptional speed and control over most loudspeakers.

A simple unity gain pre-amplifier selects between balanced XLR and direct un-balanced RCA inputs, to enable the user to input two different signals and select between either, on the fly, if required. It is fully protected from over-current, over-temperature and DC faults and will trigger the output and input relays to disengage immediately if an error occurs.

When required, the Evolution 100P can also be configured as bridged-mono to achieve even higher power output and will therefore sound more dynamic and in control. Please consult Creek Audio or your dealer for details about the external bridging adapter required to simply convert it from stereo into mono operation.

Specifications:

POWER OUTPUT>55 Watts into 8 Ohms
>85 Watts into 4 Ohms
>200 Watts in Bridged Mono
CONTINUOUS CURRENT>8.5 Amps Stereo / 16 Amps Bridged Mono
MAX CURRENT>26 Amps, Stereo
>50 Amps, Bridged Mono
Current bursts into 0.5 Ohm load
OUTPUT IMPEDANCE<0.1 Ohms @ 1KHz
THD< 0.005% 20Hz – 20KHz
SNR>102dB
FREQUENCY RESPONSE10Hz – 100KHz +/- 2dB Line
GAIN33.3dB (x46)
INPUT SENSITIVITY410mV
INPUT IMPEDANCE47k Ohms unbalanced, 30k Ohms balanced
CROSSTALK-80dB at 1Khz
DC OFFEST< +/-10mV
SLEW RATE>30 V per uS
INPUTSRCA unbalanced – XLR balanced
OUTPUTS1 Pair of high quality binding posts
OPERATING VOLTAGES110V/230V Switchable
CONSUMPTION (AT IDLE)<20 Watts (no standby)
CONSUMPTION
(AT FULL POWER)
350 Watts
WEIGHT7.5Kgs
DIMENSIONS430x60x280mm W/H/D

 

Reviews

There are no reviews yet.

Be the first to review “Creek Audio Evolution 50P”

Creek Audio Evolution 50P Power Amp
Specifications:

POWER OUTPUT >55 Watts into 8 Ohms
>85 Watts into 4 Ohms
>200 Watts in Bridged Mono
CONTINUOUS CURRENT >8.5 Amps Stereo / 16 Amps Bridged Mono
MAX CURRENT >26 Amps, Stereo
>50 Amps, Bridged Mono
Current bursts into 0.5 Ohm load
OUTPUT IMPEDANCE <0.1 Ohms @ 1KHz THD 102dB FREQUENCY RESPONSE 10Hz – 100KHz +/- 2dB Line GAIN 33.3dB (x46) INPUT SENSITIVITY 410mV INPUT IMPEDANCE 47k Ohms unbalanced, 30k Ohms balanced CROSSTALK -80dB at 1Khz DC OFFEST 30 V per uS INPUTS RCA unbalanced – XLR balanced OUTPUTS 1 Pair of high quality binding posts OPERATING VOLTAGES 110V/230V Switchable CONSUMPTION (AT IDLE) <20 Watts (no standby) CONSUMPTION (AT FULL POWER) 350 Watts WEIGHT 7.5Kgs DIMENSIONS 430x60x280mm W/H/D