PrimaLuna EVO 300 Tube Power Amplifier
$4,695.00
The PrimaLuna EVO 300 Tube Power Amplifier is a world-class, heavily engineered amplifier famous for blending classic vacuum-tube lushness with modern durability. It is widely celebrated for its Adaptive AutoBias, point-to-point wiring, and exceptional versatility for audiophiles.
Description
Stereo or Monoblock Operation
It’s as simple as flipping a switch, and PrimaLuna EVO Poweramps instantly switch from stereo to monoblock operation! Buy one, and as your budget grows your system can grow too. The benefit of monoblock operation is the amp now has dual output transformers for the best coupling with your speakers, and the addition of a 2-ohm speaker tap added to the 4 and 8-ohm taps. While all PrimaLuna amps are made for ribbons like Magnaplanars and electrostatics like Martin-Logan, you haven’t heard anything until you have heard a PrimaLuna monoblock!
Custom Toroidal Power Transformers
Power transformers generate two types of noise, magnetic and acoustic. That’s why toroidal power transformers are used in the very best audio products. Compared to standard transformers, toroids radiate about 1/10 the magnetic field that pollutes music and obscures detail. Additionally, the absence of an air gap typically means toroids have an 8:1 reduction of acoustic noise. As transformers are the most expensive components in any audio product, manufacturers will even house cheaper C-core and EI-core transformers in an outboard power supply box with an umbilical cable rather than upgrade to an expensive toroid. The increased cost is significant, but PrimaLuna doesn’t cut corners. All PrimaLuna products use massive, potted toroidal transformers. PrimaLuna transformers are enclosed in a metal housing and then potted in a non-microphonic resin to further reduce noise and to protect the windings from moisture and deterioration forever.
Custom Super-Wide-Bandwidth Output Transformers
Output transformers are the most important part of any tube amp. They determine how low the bass will reach and how high the top end goes. 250 watts of power will have no top and bottom extension if the output transformers don’t have the bandwidth. We use lower power to extend tube life, and bandwidth to give you slam. Transformers are the most expensive components in an amplifier, so manufacturers save money by using ‘off the shelf’ units available on the market. PrimaLuna output transformers are custom-designed, wound in-house, and massive. One reason why no other brand sounds like a PrimaLuna. “The flat tops and bottoms of these squarewaves correlate with the amplifier’s extended low-frequency response; PrimaLuna’s output transformers are of excellent quality.” -John Atkinson, Stereophile Magazine
Adaptive Autobias
What most companies call Auto Bias is actually “Cathode Bias”– A commonly used method that is cheap to make, and often found in guitar amps, but also $20,000 high end audio amps. It reduces the available power of the amp and runs the tubes hard, meaning shorter tube life and failures via “shorts”.
PrimaLuna’s Adaptive AutoBias is a true, smart technology employing an array of sensors to monitor tubes and make adjustments seamlessly in real time. More important, it is the ONLY circuit of its kind that is truly “adaptive” by addressing “tube pinch off” at higher volumes, therefore reducing distortion by over 50% and greatly extending tube life. Adaptive AutoBias is completely passive and NOT in the signal path. The result is low to no maintenance, long tube life, and the lowest possible distortion for amazing sound.
Adaptive AutoBias also provides unparalleled flexibility by allowing use of almost any tube on the market today. It even has a fine-tuning switch for EL-34 and KT88/KT120/KT150 tube types.
Point-to-Point Wiring w/Swiss-Made Wire
You spend a lot of money on interconnects. So why have the signal go right from the RCA jacks or speaker terminals into circuit boards with copper traces so thin you can hardly see them? What’s high-end about that?
PrimaLuna employs Point to Point Wiring on all products. The entire signal path, including resistors and capacitors, is painstakingly hand wired with heavy-gauge cable by craftsman.
EVO 300 and EVO 400 models use Swiss-made, silver-plated, oxygen-free continuous crystal (OCC) copper with a Teflon dielectric in the critical signal path for superior signal speed and increased clarity.
- Power Output: 42 watts per channel (Ultra-Linear) / 24 watts per channel (Triode) into 8 ohms, with speaker taps for 4, 8, and 16-ohm loads.
- Tube Complement: Uses six 12AU7s and two 5AR4 (or equivalent) rectifier tubes.
- Adaptive AutoBias: This proprietary, passive technology constantly monitors tubes in real-time. It eliminates the need to manually bias the amp and significantly lowers distortion.
- Triode/Ultra-Linear Switching: Switch between a warmer, sweeter Triode sound and a flatter, punchier Ultra-Linear presentation right from the remote.
- Premium Build Quality: Features heavy-duty, point-to-point wiring with Swiss-made, silver-plated OCC copper and Teflon dielectric. It also includes an AC Offset Killer to eliminate mechanical transformer hum.
Triode/UL Remote
Triode or Ultralinear Operation
Stereo/Mono Switchable
Adaptive AutoBias
Point to Point Wiring w/ Premium Swiss Wire
Takman Resistors
Bad Tube Indicator
Wide-Bandwidth Output Transformers
Potted Toroidal Power Transformer
Input Impedance: 100 kΩ
| Power: Stereo Ultra-linear | 44 watts x 2 (EL34) (8Ω, 1% THD) |
| Power: Stereo Triode | 22 watts x 2 (EL34) (8Ω, 1% THD) |
| Power: Mono Ultra-linear | 85 watts (EL34) (8Ω, 1% THD) |
| Power: Mono Triode | 45 watts (EL34) (8Ω, 1% THD) |
| Inputs | 1x Stereo RCA 1x Stereo XLR |
| Outputs | 4, 8, & 16 Ω (stereo) 2, 4, & 8 Ω (mono) |
| Freq. Response | 10Hz-70kHz +/- 1dB 8Hz-75kHz +/- 3dB |
| THD | < 0.1% @ 1W (stereo) < 0.17% @ 1W (mono) < 2% @ Rated Power (stereo/mono) |
| S/N Ratio | 91 dB, 105 dBA |
| Input Sensitivity | 870mV (stereo) 880mV (mono) |
| Input Impedance | 100kΩ |
| Power Consumption | 290 watts (EL34) 300 watts (KT88) 330 watts (KT120) 340 watts (KT150) |
| Standard Tube Complement | 6 – 12AU7, 4 – EL34 |
| Dimensions (WxHxD) | 15.2″ x 8″ x 15.9″ |
| Weight | 66 lbs |
You must be logged in to post a review.

Reviews
There are no reviews yet.