Crown CDi DriveCore 4 1200
Crown CDi DriveCore 4 1200 Amplifier
0% – 3 Year Financing Available!! – $3513.79
Free Shipping in Continental U.S.
Analog input, 4 channel, 1200W per output channel
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost.
Product Description
Crown CDi DriveCore 4 1200 Amplifier
$3513.79
0% – 3 Year Financing Available!!
Free Shipping in Continental U.S.
Analog input, 4 channel, 1200W per output channel
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|1200 offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more. Designed for ease-of-use in a variety of applications, the 4|1200 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
FEATURE COMPARISON
| CDi DriveCore Model | Channels | Network Control | DSP | Control Port | BLU link |
| 2|300 | 2 | √ | √ | √ | |
| 2|300BL | 2 | √ | √ | √ | √ |
| 4|300 | 4 | √ | √ | √ | |
| 4|300BL | 4 | √ | √ | √ | √ |
| 2|600 | 2 | √ | √ | √ | |
| 2|600BL | 2 | √ | √ | √ | √ |
| 4|600 | 4 | √ | √ | √ | |
| 4|600BL | 4 | √ | √ | √ | √ |
| 2|1200 | 2 | √ | √ | √ | |
| 2|1200BL | 2 | √ | √ | √ | √ |
| 4|1200 | 4 | √ | √ | √ | |
| 4|1200BL | 4 | √ | √ | √ | √ |
Output Power Dual Mode – All Channels Driven
| CDi DriveCore Model | Channels | 2Ω | 4Ω | 8Ω | 16Ω | 70Vrms | 100Vrms |
| 2|300 / 2|300BL | 2 | 150W | 300W | 300W | 150W | 300W | 300W |
| 4|300 / 4|300BL | 4 | 150W | 300W | 300W | 150W | 300W | 300W |
| 2|600 / 2|600BL | 2 | 300W | 600W | 600W | 300W | 600W | 600W |
| 4|600 / 4|600BL | 4 | 300W | 600W | 600W | 300W | 600W | 600W |
| 2|1200 / 2|1200BL | 2 | 850W | 1200W | 1200W | 600W | 1200W | 1200W |
| 4|1200 / 4|1200BL | 4 | 850W | 1200W | 1200W | 600W | 1200W | 1200W |
Minimum Guaranteed Power (1kHz, all channels driven, max distortion 0.5%, duration 0.5 seconds, 120 – 240Vrms – 50/60Hz)
Output Power: Bridge Mono Mode – All Channels Driven
| CDi DriveCore Model | 4Ω | 8Ω | 16Ω | 140Vrms | 200Vrms |
| 2|300 / 2|300BL | 300W | 600W | 600W | 600W | 600W |
| 4|300 / 4|300BL | 300W | 600W | 600W | 600W | 600W |
| 2|600 / 2|600BL | 600W | 1200W | 1200W | 1200W | 1200W |
| 4|600 / 4|600BL | 600W | 1200W | 1200W | 1200W | 1200W |
| 2|1200 / 2|1200BL | 1200W | 2400W | 2400W | 2400W | 2400W |
| 4|1200 / 4|1200BL | 1200W | 2400W | 2400W | 2400W | 2400W |
Minimum Guaranteed Power (1kHz, all channels driven, max distortion 0.5%, duration 0.5 seconds, 120 – 240Vrms – 50/60Hz)
SPECIFICATIONS:
– BLU link: No
– Channels: 4
– Sensitivity (for full rated power at 8 ohms): 0.7V RMS
– Rated Power Output (per channel @ 4 ohms): 1200W
– Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz – 20kHz) at 8 ohms): > 104dB
– THD (full rated power, 20 Hz – 20 kHz): 0.35%
– Damping Factor (20 Hz to 100 Hz): > 1000
– Frequency Response (8Ω, 20 Hz – 20 kHz): +/-0.25dB
– Crosstalk (below rated power) 20 Hz to 1 kHz: > 80dB
– Input Impedance (nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unbalanced
– Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion): 19 x 3.5 x 14.71
– Weight: 20.1 lbs (9.12 kg)
– Power Supply Connector: “20A IEC connector, 100 – 240V”
You must be logged in to post a review.
Crown CDi DriveCore 4 1200 Amplifier
Specifications
– BLU link: No
– Channels: 4
– Sensitivity (for full rated power at 8 ohms): 0.7V RMS
– Rated Power Output (per channel @ 4 ohms): 1200W
– Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz – 20kHz) at 8 ohms): > 104dB
– THD (full rated power, 20 Hz – 20 kHz): 0.35%
– Damping Factor (20 Hz to 100 Hz): > 1000
– Frequency Response (8Ω, 20 Hz – 20 kHz): +/-0.25dB
– Crosstalk (below rated power) 20 Hz to 1 kHz: > 80dB
– Input Impedance (nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unbalanced
– Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion): 19 x 3.5 x 14.71
– Weight: 20.1 lbs (9.12 kg)
– Power Supply Connector: “20A IEC connector, 100 – 240V”
Reviews
There are no reviews yet.