Synergistic Research PowerCell 12 UEF S


0% Financing Available!!

Synergistic Research PowerCell 12 UEF S

The heavier 10 gauge wire allows the S version to deliver slightly more current on demand. Unlimited current supply.

Product Description

0% Financing Available!!

Synergistic Research PowerCell 12 UEF S

10 gauge Silver Matrix wire with Graphene. The heavier 10 gauge wire allows the S version to deliver slightly more current on demand. Graphene is used throughout the PowerCell’s circuit, increasing conductivity and overall performance. Included is the High Current Level 3 Atmosphere power cord. Swiss Made power supply for Active Shielding. Chassis

High carbon steel chassis, with a coating that blocks EM and RFI interference.


Silver Ground Strap

The highly conductive 62 cm² 99.995% pure silver Ground Strap.



  • All 10 and 12 awg. Silver Matrix, Teflon-coated wiring
  • Connector Output US: 12 each Black UEF Outlets (Two stage Quantum Treatment)
  • Connector Output International (EU/AU/UK): 12 each Black UEF Schuko outlets (Two stage Quantum Treatment)
  • UEF – Graphene treatment throughout unit
  • Internal “Active” power supply for biasing EM Cells
  • 2nd generation Internal ULF (Ultra-low frequency) Generator to bias AC to the Earth’s Schumann Resonance for a dramatic drop in a system’s noise floor
  • 2 each SR Power Transformers
  • 8 each SR Quantum Capacitors in EM Cell power supply and ULF field generator
  • High Carbon Steel/Aluminum “Ground Plane” chassis
  • New 6 EM Cell topology acts like a ‘Super Capacitor’ to increase peak current on demand allowing components to draw more current than when connected directly to the wall for added dynamic headroom
  • Internal Active UEF EM Horizontal Plane Cell area: 640 square centimeters
  • 5 x Internal Active UEF EM Folded Carbon Fiber Cell area: 2343.15 square centimeters total
  • Connector Input: 1 each Neutrik 32 amp PowerCon
  • 2 Isolated Output Banks; can be used to isolate analog from digital components
  • 99.995% Pure Silver Ground Strap: 62 square centimeters
  • 1 each special 10-gauge Atmosphere Level 3 Active PowerCell power cord that does not require a separate MPC, just plug and play like standard non-active power cords—no extra wires
  • Height 5.5″ x Width 17.5″ x Depth 13.5″
  • Weight: 19 lbs.

Voltage and current Rating:

  • Input rating US: 20amp/125v
  • US Version: Rating is limited by the US Outlet rating of 20amp/125v


Included is the Atmosphere Level 3 PowerCell power cord


  • Connector Input US: 1 each Synergistic Research G07 Pure Gold
  • Connector Output US: Synergistic Research G07 Pure Gold IEC 15 amp and 20 amp connectors 

 Build Notes:

  • 32 point-to-point hand soldered connections
  • 1 Termination for Atmosphere Active Tuning Module (Red)
  • 1 Termination for Atmosphere UEF Passive Tuning Module (Gold)
  • Silver Solder: 4%
  • Hand build time: 2.0 hours
  • Quantum Tunneling: cable & connections are treated with 1,000,000 volts of electricity. Allows electrons to flow more freely.
  • 5 day Burn-in: 2 step process
  • Handmade in California


There are no reviews yet.

Be the first to review “Synergistic Research PowerCell 12 UEF S”